This solution employs a router/server computer with two network interfaces, one is a network uplink, the other connects to the wifi routers with their respective supplicants.
Users authenticate using a username and password, and verify the identity of the RADIUS server using a certificate presented by the server (see more information under supplicant configuration).
As mentioned in '@@@', the NASes available do not support sending RADIUS accounting packets, they are only able to authenticate users against the response from a RADIUS server. This solution uses 802.1X to authenticate users and let them into the wireless network, and then Shorewall to perform the logging/accounting work. FreeRADIUS logs the MAC address of all devices that connect along with the username they authenticated as, this information can be used to match information in Shorewall's logs to a user session. For improved security the firewall policy will be to disallow all connections except those originating from known IP addresses of known wifi clients. A script, shwl_add.sh, gets run by FreeRADIUS upon successful authentication of a supplicant, which runs an ARP scan to find the IP address of the device with the MAC address specified by FreeRADIUS, it then adds the IP address to shorewall's "whitelist", logs the event along with some useful information to a MySQL database and writes the current timestamp to a text file. In Access-Accept packets the Session-Timeout and Termination-Action attributes are sent, informing the NAS that after the specified amount of time the supplicant needs to repeat the authentication process or be disconnected. When the supplicant repeats authentication the mentioned script detects that the supplicant is already known and simply logs the event to MySQL and updates the timestamp in the text file. Another script, shwl_del.sh, is run by crontab at a regular interval, which goes through all the IP addresses present in shorewall's "whitelist" and checks the timestamp of the corresponding supplicant's last authentication to FreeRADIUS in the corresponding text file. If more than the specified amount of time has passed, this script assumes that the supplicant has disconnected from the wifi network and removes its IP from shorewall's "whitelist", logs the event to MySQL, and deletes the related text files.
A python script, script_launcher.py, serves as an intermediary that is launched by FreeRADIUS using its Rlm_python module and in turn launches shwl_add.sh.
The database backend containing user credentials for FreeRADIUS is MySQL. Adding/deleting users can be accomplished by SQL queries which can be included in site specific custom user management scripts or as hooks to the standard 'adduser' and 'deluser' utilities (out of the scope of this guide). Updating of passwords is accomplished by a script, pam_to_mysql_update.sh, that gets run by the libpam-script PAM module during PAM stack execution, and updates the password in the MySQL database according to the same password the user chose for their system user account. An entry with the username field already filled and matching the system user account username needs to be already present in the MySQL database. Commands that expire or disable a user's system user account (or password) without deleting it (such as passwd -l) will not cause the credentials in the MySQL database to be disabled, thus it is necessary to take care (perhaps with a site specific lock user script) to also invalidate the same.
Shorewall dynamic zones are used to achieve the dynamic change of firewall rules set for the IP addresses added/removed to the "whitelist". The rules for the normal zone concerning the network connecting to the NASes/supplicants disallows all connections, except those needed for the RADIUS conversation between the NASes and FreeRADIUS. A dynamic zone is declared under the normal zone, whose rules allow network access, with logging. The 'shorewall add <dynamic_zone_name> <ip_address>' and 'shorewall delete <dynamic_zone_name> <ip_address>' commands can then be used by the shwl_*.sh scripts to change the rules applicable for the specified source IP address.
Sudo is installed and configured as it is required for some of the mentioned scripts to run commands as root or as a different user.
A package containing the mentiond scripts, as well as the empty MySQL schema for the database used by some of them, is attached to this wiki page.
A MySQL schema is contained in the shwl_add_shwl_del_pmu.sql in the attached archive. It is used by the shwl_add.sh, shwl_del.sh and pam_to_mysql_update.sh scripts to log events and errors. It contains a single table named 'event_log', it's format is as follows:
log_id | device_username | device_ip | device_mac | rad_attr_NAS-IP-Address | rad_attr_NAS-Port | rad_attr_Called-Station-Id | rad_attr_NAS-Identifier | rad_attr_Framed-MTU | rad_attr_NAS-Port-Type | rad_attr_EAP-Type | rad_attr_Event-Timestamp | log_time | event |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
A unique identifier for the entry, auto-generated by MySQL | See the below sections on each script for all possible values | See the below sections on each script for all possible values | See the below sections on each script for all possible values | The value of the NAS-IP-Address RADIUS attribute, when applicable | The value of the NAS-Port RADIUS attribute, when applicable | The value of the Called-Station-Id RADIUS attribute, when applicable | The value of the NAS-Identifier RADIUS attribute, when applicable | The value of the Framed-MTU RADIUS attribute, when applicable | The value of the NAS-Port-Type RADIUS attribute, when applicable | The value of the EAP-Type RADIUS attribute, when applicable | The value of the Event-Timestamp RADIUS attribute, when applicable | The time when the entry is logged | Description of the event, see the below sections on each script for all possible values |
NOTE: The 'log_time' column indicates the time when the MySQL entry was logged (i.e. all the scripts use the MySQL NOW() function in the field for this column in all their queries), whereas the rad_attr_Event-Timestamp column contains the content of the Event-Timestamp RADIUS attribute, when applicable, which is expected to contain the timestamp of when the RADIUS server received the request ('@@@').
This script is intended to be run by script_launcher.py (below mentioned).
It reads 10 lines on stdin, as follows:
1 | Username (RADIUS attribute: User-Name) |
2 | Supplicant MAC address (RADIUS attribute: Calling-Station-Id) |
3 | RADIUS attribute: NAS-IP-Address |
4 | RADIUS attribute: NAS-Port |
5 | RADIUS attribute: Called-Station-Id |
6 | RADIUS attribute: NAS-Identifier |
7 | RADIUS attribute: Framed-MTU |
8 | RADIUS attribute: NAS-Port-Type |
9 | RADIUS attribute: EAP-Type |
10 | RADIUS attribute: Event-Timestamp |
The supplicant MAC address is used in the script, the remaining values are simply logged into the MySQL database. Some sanity check is performed on the username before the script continues. The supplicant MAC address is processed so as to obtain it in both of the following formats regardless of the format the NAS specified it in: filename friendly version: 0123456789ab, normal version: 01:23:45:67:89:ab. The script then checks if a file named as the filename friendly version of the supplicant MAC address already exists (referred to by the script as an IP file). If it does not, the script runs an ARP scan on the configured network interface and in the resulting table, looks for the IP address matching the specified supplicant MAC address. In case no such device is found, it repeats the scan a configurable amount of times at a configurable interval before giving up. Once a matching IP is found some amount of sanity check is performed on the scan results (e.g. to detect multiple MACs being used by the found IP), and then the event is logged into MySQL with "connect" mentioned in the 'event' column, the found IP is added to the configured shorewall dynamic zone, and a file named as the filename friendly version of the supplicant MAC address is created containing the device's IP, and a file named as the device's IP (referred to by the script as a timestamp file) is created containing the present timestamp. In case adding the IP address to the shorewall dynamic zone is not successful, the script waits a configurable amount of time, and then attempts a second time, after which it gives up (it was observed that it might happen that FreeRADIUS starts earlier in the boot process than Shorewall, and if this script is started during that timeframe the shorewall add command fails). In case the IP file is already present, the script simply logs the event to MySQL with "re-auth" mentioned in the 'event' column and re-writes the timestamp file with the present timestamp. In case an error is encountered, the script logs the error to MySQL mentioning "err-add-N" (where N is the error number) in the 'event' column, populating the remaining columns with their respective information as may be available at the time of the error, and exits immediately, returning the error number as exit code. In case access is available to the script's stdout and stderr, a description of the error message is also printed (and the script is quite verbose about what's happening), in case not, it is possible to look in the script's code for calls to the shwl_add_error_message_close() function, identify the call where the error number in question is passed to the function, and the error description can be found in the same function call. The configurable options can be found at the top of the script. The username is logged into the 'device_username' column, the IP address found during the scan is logged in the 'device_ip' column, the above mentioned normal version of the supplicant MAC address is logged in the 'device_mac' column, and the remaining RADIUS attributes are logged in the columns with the respective names.
shwl_del.sh '@@@'
This script is intended to be run by crontab at a regular interval.
This script loops through all the IP addresses present in the configured shorewall dynamic zone, reads their corresponding timestamp file (see shwl_add.sh description) and checks whether the configured amount of time has elapsed since. If it has, it logs the event to MySQL specifying "expire" in the 'event' column, removes the IP from the shorewall dynamic zone, deletes the timestamp file and searches for files (although there should be only one) containing the IP address (to find the IP file, see shwl_add.sh description) and deletes them. In the unexpected case that no timestamp file is found for a given IP or it does not contain a valid timestamp, the same actions are taken as when the configured amount of time has elapsed, but "untracked" is mentioned in the 'event' column instead of "expire". In case an error is encountered, the script logs the error to MySQL mentioning "err-del-N" (where N is the error number) in the 'event' column, populating the remaining columns with their respective information as may be available at the time of the error, but continues execution. At the end, it returns the error number as exit code, or, in case there were multiple errors, 127. In case access is available to the script's stdout and stderr, a description of the error message is also printed (and the script is quite verbose about what's happening), in case not, it is possible to look in the script's code for calls to the shwl_del_error_message() function, identify the call where the error number in question is passed to the function, and the error description can be found in the same function call. The configurable options can be found at the top of the script. The IP address being processed is logged in the 'device_ip' column, a comma separated list of the IP files is logged in the 'device_mac' column, or the text "/// no-ip-files ///" in case no IP files were present, or the text "/// err-del-N ///" (where N is the error number) in case an error occurred while searching for the file(s), and the rad_attr_* as well as the 'device_username' columns are left empty. The text "/// n/a ///" may be present in the 'device_ip' and 'device_mac' columns if this information is not applicable.
script_launcher.py
This script is intended to be called by the FreeRADIUS Rlm_python module, which, in the intended configuration, calls the post_auth(attr) function passing a tuple of tuples containing the relevant RADIUS attributes and their values as the 'attr' argument.
This script looks for the values of the following items in the tuple of tuples:
User-Name | Mandatory |
Calling-Station-Id | Mandatory |
NAS-IP-Address | Mandatory |
NAS-Port | Optional |
Called-Station-Id | Mandatory |
NAS-Identifier | Optional |
Framed-MTU | Optional |
NAS-Port-Type | Optional |
EAP-Type | Optional |
Event-Timestamp | Mandatory |
The script executes the configured command in the background and then writes to the new process's stdin the values of the above attributes, one attribute on each line, in the order shown in the table. It then exits, leaving the new process running. If one of the RADIUS attributes mentioned above as "Optional" is missing, the script writes "None" in its place. If one of the "Mandatory" ones is missing an error occurs. In case an error is encountered, the script exits immediately, returning radiusd.RLM_MODULE_FAIL. (This means if an error occurs after the new process has been launched, e.g. because a mandatory RADIUS attribute is missing, the script exits leaving the new process running, doing nothing, waiting for its stdin to be populated). If no error occurs, the script returns radiusd.RLM_MODULE_OK at the end. The configurable options can be found at the top of the script.
This script is intended to be run by the libpam-script PAM module during the PAM auth and PAM password stacks execution. In the intended configuration, the libpam-script module checks the script's exit code and reports failure back to the PAM stack, causing the PAM operation to fail, in case an error occurred in the script.
It reads the following environment variables:
PAM_USER | The system user for whom the PAM operation is running |
PAM_AUTHTOK | The user's password (in case of a password change operation, the new password) |
PAM_SERVICE | The service that invoked PAM (e.g. sshd when the user is attempting to log in through SSH) |
This script checks, first, if it is running as root or not (the PAM stack does not necessary run as root, but as the user as which the service that invoked it is running). If it is, it proceeds to encrypt the user's password (${PAM_AUTHTOK}) as an N '@@@' and update it in the 'value' column of the 'radcheck' table in the 'radius' MySQL database for the entry where the value of the 'username' column matches the user's username (${PAM_USER}). Due to the nature of the SQL query used, there needs to already be an entry in the table containing the matching username in the 'username' column (for functionality it should actually also already contain the appropriate values for the remaining columns, except the 'value' column). If it is not running as root, it uses a workaround to escalate its privileges. It uses the available credentials to SSH into localhost as the user in question, causing the SSH daemon to run a new instance of the PAM stack to verify the user's credentials (and sshd runs the PAM stack as root) and thus a new instance of the script, as root. Before doing so the script makes sure that the PAM stack has not already now been invoked by sshd, in order to avoid, in case sshd should ever decide to run the PAM stack as a non-root user, that an infinite loop occurs spawning endless processes of this script, sshd, PAM, etc.
In case an error is encountered, the script logs the error to the above mentioned '@@@' 'event_log' table in MySQL mentioning "err-pmu-N" (where N is the error number) in the 'event' column, populating the 'device_username' column with the user's username, leaving the other columns empty, and exits immediately, returning the error number as exit code. The error is logged to MySQL only if the script is running as root. In case access is available to the script's stdout and stderr, a description of the error message is also printed (and the script is quite verbose about what's happening if cfg_verbose is set to 1), in case not, it is possible to look in the script's code for calls to the pam_to_mysql_update_error_message_close() function, identify the call where the error number in question is passed to the function, and the error description can be found in the same function call. The configurable options can be found at the top of the script.
In the intended PAM/libpam-script configuration, in the case of the script running SSH to start a second instance as root, in the case the second instance (running as root) fails and returns an error exit code, libpam-script will report failure to the PAM stack, causing the authentication to fail, thus the SSH login to fail, and the ssh command that was launched in the first instance of the script, resulting finally in the first instance of the script to also fail, the first instance of libpam-script, and thus the first PAM stack. Setting cfg_verbose=1 will cause the script's verbose output to appear on screen in cases where a service invoking the PAM stack allows, e.g. when running the 'su' command.
Here, we replicate the relevant configuration already present on server.lastschl.av as a starting point. The test virtual machine will have two network interfaces, one serving as uplink on a 192.168.10.0/24 network (IP 192.168.10.52), and one to connect to the wifi routers/clients on a 192.168.9.0/24 network (IP 192.168.9.1). The FQDN will be server.test.av.
Imported Last School's Debian9 VM template "Debian9-base.ova" into Virtual Box as Debian9-base_8021x, re-initializing all MAC addresses. The description for this virtual machine template is:
Debian 9 amd64 installation - Hostname: debian9-base - User accounts (username password): ls last root last - Partitioning: --- Physical: ------ 1GB RAID boot flag ------ 29GB RAID --- RAID: ------ md0: ext3 /boot ------ md1: LVM - part of volume group debian9-base --- LVM (VG/LV): ------ debian9-base/root: 18.6GB ext4 / ------ debian9-base/swap: 3.72GB swap area - Up to date as of 2017-09-27 - sources.list includes: Sections: main contrib non-free Additional repository: backports - Apt-cacher configured as per Last School site (Proxy credentials will need to be entered in /etc/apt/apt.conf.d/02proxy by user) - SSH access installed and enabled - Gnome and Firefox configured to auto-detect proxy settings - Extra software installed: vlc gimp emacs fonts-indic tcpdump iperf exfat-utils wireshark - One network interface as bridged adapter, cable connected. |
Added a second ethernet adapter in settings, connected to "Bridged adapter", re-initialized its MAC address
Increased the allocated CPUs to 2
The host computer has two network interfaces, one connected to a network uplink and another connected to a couple of wifi routers. Each VirtualBox virtual interface is bridged to a different physical adapter. Network configuration is now as follows (interface name seen in guest OS - Adapter name in VirtualBox settings - Adapter "Attached to" setting in VirtualBox settings - Physical interface bridged to):
enp0s3 - Adapter 1 - Bridged adapter- physical interface connected to uplink
enp0s8 - Adapter 2 - Bridged adapter - physical interface connected to wifi routers
Booted the VM, logged in to the GUI, connected using DHCP with network manager
In terminal:
rm /etc/apt/apt.conf.d/02proxy apt-get update apt-get upgrade |
Rebooted the virtual machine
Set strong passwords for ls and root users
Installed my ssh public key in root's .ssh/authorized_keys file.
Shorewall (based on LASTSCHL-207):
apt-get install shorewall apt-get install ipset mv /etc/shorewall{,-orig} mkdir /etc/shorewall |
Configuration:
root@debian9-base:/etc/shorewall# for i in `ls`; do echo "========= $i ========="; cat $i | grep -v "^#" | grep -v "^$"; echo "========= $i ========="; echo ""; done ========= hosts ========= ========= hosts ========= ========= interfaces ========= net enp0s3 detect tcpflags,dhcp,nosmurfs,routefilter,logmartians wifi enp0s8 detect tcpflags,nosmurfs,routefilter,logmartians ========= interfaces ========= ========= masq ========= enp0s3 192.168.9.0/24 ========= masq ========= ========= policy ========= $FW net REJECT INFO(uid) $FW wifi ACCEPT INFO(uid) wifi all REJECT net all DROP INFO all all REJECT info ========= policy ========= ========= routestopped ========= ========= routestopped ========= ========= rules ========= Invalid(DROP) net all ACCEPT:INFO(uid) net $FW tcp 22 ACCEPT:INFO(uid) net $FW udp 123 ACCEPT:INFO(uid) net $FW icmp ACCEPT:INFO(uid) $FW net tcp 465,587,995,993 ACCEPT:INFO(uid) $FW net udp 53,123 ACCEPT:INFO(uid) $FW net icmp ACCEPT:INFO(uid) $FW net tcp - - - - root ACCEPT:INFO(uid) $FW net udp - - - - root ACCEPT:INFO(uid) $FW net icmp - - - - root ACCEPT:INFO(uid) $FW net tcp - - - - _apt ACCEPT:INFO(uid) $FW net udp - - - - _apt ACCEPT:INFO(uid) $FW net icmp - - - - _apt ========= rules ========= ========= shorewall.conf ========= .... STARTUP_ENABLED=Yes .... IP_FORWARDING=On .... ========= shorewall.conf ========= ========= zones ========= fw firewall net ipv4 wifi ipv4 ========= zones ========= |
In /etc/default/shorewall, set
startup=1 |
root@debian9-base:~# cat /etc/rsyslog.d/40-shorewall.conf :msg, contains, "Shorewall:" /var/log/shorewall & stop root@debian9-base:~# cat /etc/logrotate.d/shorewall /var/log/shorewall-init.log { weekly rotate 108 compress nomissingok create 0640 root adm } /var/log/shorewall { rotate 731 daily nomissingok notifempty delaycompress compress dateext postrotate reload rsyslog >/dev/null 2>&1 || true endscript } root@debian9-base:~# cat /etc/logrotate.d/rsyslog /var/log/syslog /var/log/auth.log { rotate 731 daily dateext nomissingok notifempty delaycompress compress postrotate invoke-rc.d rsyslog rotate > /dev/null endscript } /var/log/mail.info /var/log/mail.warn /var/log/mail.err /var/log/mail.log /var/log/daemon.log /var/log/kern.log /var/log/user.log /var/log/lpr.log /var/log/cron.log /var/log/debug /var/log/messages { rotate 4 weekly missingok notifempty compress delaycompress sharedscripts postrotate invoke-rc.d rsyslog rotate > /dev/null endscript } root@debian9-base:~# cat /etc/logrotate.conf # see "man logrotate" for details # rotate log files weekly weekly # keep 4 weeks worth of backlogs rotate 4 # create new (empty) log files after rotating old ones create # uncomment this if you want your log files compressed #compress # packages drop log rotation information into this directory include /etc/logrotate.d # no packages own wtmp, or btmp -- we'll rotate them here /var/log/wtmp { nomissingok monthly create 0664 root utmp rotate 24 } /var/log/btmp { nomissingok monthly create 0660 root utmp rotate 24 } # system-specific logs may be configured here |
systemctl enable shorewall.service |
Configure network and DHCP (based on LASTSCHL-212):
systemctl disable network-manager.service systemctl disable NetworkManager.service unlink /etc/resolv.conf echo nameserver 192.168.10.1 > /etc/resolv.conf mkdir /etc/ltsp |
root@debian9-base:~# cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The external interface auto enp0s3 iface enp0s3 inet static address 192.168.10.52 network 192.168.10.0 netmask 255.255.255.0 broadcast 192.168.10.255 gateway 192.168.10.1 # The wifi interface auto enp0s8 iface enp0s8 inet static address 192.168.9.1 netmask 255.255.255.0 broadcast 192.168.9.255 root@debian9-base:~# cat /etc/dhcp/dhcpd.conf | grep -v "^#" | grep -v "^$" # Some of the following lines are there by default and are probably not required ddns-update-style none; option domain-name "example.org"; option domain-name-servers ns1.example.org, ns2.example.org; default-lease-time 600; max-lease-time 7200; log-facility local7; include "/etc/ltsp/dhcpd.conf"; root@debian9-base:~# cat /etc/ltsp/dhcpd.conf # # Default LTSP dhcpd.conf config file. # authoritative; subnet 192.168.9.0 netmask 255.255.255.0 { range 192.168.9.40 192.168.9.250; option domain-name "test.av"; option domain-name-servers 192.168.9.1; option broadcast-address 192.168.9.255; option routers 192.168.9.1; option subnet-mask 255.255.255.0; option root-path "/opt/ltsp/amd64"; if substring( option vendor-class-identifier, 0, 9 ) = "PXEClient" { filename "/ltsp/amd64/pxelinux.0"; } else { filename "/ltsp/amd64/nbi.img"; } } |
apt-get install isc-dhcp-server |
In /etc/default/isc-dhcp-server, set:
INTERFACESv4="enp0s8" |
Configure DNS (based on LASTSCHL-211):
apt-get install dnsmasq touch /var/log/dnsmasq chmod 640 /var/log/dnsmasq |
root@debian9-base:~# cat /etc/dnsmasq.conf | grep -v "^#" | grep -v "^$" strict-order interface=enp0s8 expand-hosts domain=test.av log-queries log-facility=/var/log/dnsmasq root@debian9-base:~# cat /etc/logrotate.d/dnsmasq /var/log/dnsmasq { rotate 731 daily nomissingok notifempty delaycompress compress dateext postrotate reload rsyslog >/dev/null 2>&1 || true endscript } root@debian9-base:~# cat /etc/hostname server.test.av root@debian9-base:~# cat /etc/hosts 127.0.0.1 localhost 192.168.9.1 test.av 192.168.9.1 server.test.av server # The following lines are desirable for IPv6 capable hosts ::1 localhost ip6-localhost ip6-loopback ff02::1 ip6-allnodes ff02::2 ip6-allrouters |
Now that we have a working setup similar to the production one, we will modify it to implement the new solution.
Download the latest version of the attached shwl_add_shwl_del_sl_pmu archive and extract it somewhere convenient.
Add to /etc/shorewall/hosts:
wifi1 enp0s8:dynamic |
Modify /etc/shorewall/policy:
# Just after: wifi all REJECT # Added: wifi1 net ACCEPT INFO wifi1 $FW ACCEPT INFO(uid) $FW wifi1 ACCEPT INFO(uid) # Before: net all DROP INFO |
Add to /etc/shorewall/zones:
.... wifi1:wifi ipv4 dynamic_shared |
In /etc/shorewall/shorewall.conf set:
SAVE_IPSETS=Yes |
Add to /etc/shorewall/rules (replace IP addresses with actual IP address of wifi routers):
# At the top of the file: ?SECTION ALL # Allow the server and NASes to talk RADIUS and HTTP (web interface) ACCEPT wifi:192.168.9.2,192.168.9.3,192.168.9.4 $FW tcp - 80 ACCEPT $FW wifi:192.168.9.2,192.168.9.3,192.168.9.4 tcp 80 - ACCEPT wifi:192.168.9.2,192.168.9.3,192.168.9.4 $FW udp 1812 - ACCEPT $FW wifi:192.168.9.2,192.168.9.3,192.168.9.4 udp - 1812 # But, reject anything else to and from any other device part of the 192.168.9.0/24 network that is not part of any dynamic zone REJECT wifi all - - - REJECT all wifi - - - ?SECTION NEW # At the end of the file: ACCEPT:INFO(uid) wifi:192.168.9.2,192.168.9.3,192.168.9.4 $FW udp 1812 |
apt-get install freeradius systemctl enable freeradius.service |
Modify /etc/freeradius/3.0/mods-available/eap:
comment the following:
.... # md5 { # } .... # leap { # } .... # gtc { # # The default challenge, which many clients # # ignore.. # #challenge = "Password: " # # # The plain-text response which comes back # # is put into a User-Password attribute, # # and passed to another module for # # authentication. This allows the EAP-GTC # # response to be checked against plain-text, # # or crypt'd passwords. # # # # If you say "Local" instead of "PAP", then # # the module will look for a User-Password # # configured for the request, and do the # # authentication itself. # # # auth_type = PAP # } .... # tls { # # Point to the common TLS configuration # tls = tls-common # # # # # As part of checking a client certificate, the EAP-TLS # # sets some attributes such as TLS-Client-Cert-CN. This # # virtual server has access to these attributes, and can # # be used to accept or reject the request. # # # # virtual_server = check-eap-tls # } .... |
modify the 'default_eap_type' directive under section 'eap' to be:
default_eap_type = peap |
and the 'default_eap_type' directive under section 'ttls' to be:
default_eap_type = mschapv2 |
Modify /etc/freeradius/3.0/sites-available/default, comment the following lines (see comments included in the code block):
# All the listen sections except the IPv4 version with "type = auth" listen { ipaddr = * port = 0 type = acct limit { } } listen { type = auth ipv6addr = :: # any. ::1 == localhost port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { ipv6addr = :: port = 0 type = acct limit { } } # In the authorize section: chap mschap digest files -ldap pap # In the authenticate section: Auth-Type PAP { pap } Auth-Type CHAP { chap } Auth-Type MS-CHAP { mschap } mschap digest |
Uncomment the following line in the 'authorize' section:
auth_log |
Add the following line at the end of the 'post-auth' section and at the beginning of the Post-Auth-Type REJECT section:
reply_log |
Add the following in the post-auth section, just before the Post-Auth-Type REJECT section:
update reply { Session-Timeout := 3600 Termination-Action := 1 } |
Modify /etc/freeradius/3.0/sites-available/inner-tunnel, comment the following lines:
# The whole listen section listen { ipaddr = 127.0.0.1 port = 18120 type = auth } # In the authorize section: chap mschap files -ldap # In the authenticate section: Auth-Type PAP { pap } Auth-Type CHAP { chap } Auth-Type MS-CHAP { mschap } |
Add the following line after 'filter_username' and before 'suffix' in the 'authorize' section:
auth_log |
Add the following line at the end of the 'post-auth' section and at the beginning of the Post-Auth-Type REJECT section:
reply_log |
Modify /etc/freeradius/3.0/radiusd.conf, set (in the 'log' section):
auth = yes |
Modify /etc/freeradius/3.0/clients.conf, comment the 'client localhost' and 'client localhost_ipv6' section and add (replace with actual IP addresses of wifi routers):
client wifi-ap1 { ipaddr = 192.168.9.2 secret = password # Replace with an actual password } client wifi-ap2 { ipaddr = 192.168.9.3 secret = password # Replace with an actual password } client wifi-ap3 { ipaddr = 192.168.9.4 secret = password # Replace with an actual password } |
Modify /etc/logrotate.d/freeradius, modify the following options as follows ('dateext' option needs to be added):
rotate 732 nomissingok dateext |
rm /var/log/freeradius/radius.log rm /var/log/freeradius/radwtmp chmod o-rwx /var/log/freeradius chown freerad:freerad /var/log/freeradius chmod o-rwx /etc/freeradius |
It has been observed that radius.log comes with world-readable permissions upon installation of the package, deleting it causes FreeRADIUS to re-create it, and it gets re-created with more secure permissions. /etc/freeradius also comes with the executable bit set for all users, which makes it easier for sensitive information contained within to be world-readable in case the permissions of an individual file are not set restrictive enough (as was, by default, the case with the file containing the encryption passwords for the SSL certificates). Could not find any information on the net on whether there is a good reason for the executable bit being set, so, decided it is safer to remove it.
Modify /etc/freeradius/3.0/certs/server.cnf, set the following settings:
... [ CA_default ] ... default_days = 732 ... [ req ] ... input_password = password # Replace with an actual password output_password = password # Replace with an actual password, should be same as input_password ... [certificate_authority] countryName = IN stateOrProvinceName = Tamil Nadu localityName = Auroville organizationName = Test emailAddress = admin@test.av commonName = "Test Certificate Authority" ... |
Modify /etc/freeradius/3.0/certs/ca.cnf, set the following settings:
... [ CA_default ] ... default_days = 732 ... crlDistributionPoints = URI:http://server.test.av/test_ca.crl [ req ] ... input_password = password # Replace with an actual password output_password = password # Replace with an actual password, should be same as input_password [server] countryName = IN stateOrProvinceName = Tamil Nadu localityName = Auroville organizationName = Test emailAddress = admin@test.av commonName = "Test Server Certificate" [v3_ca] ... crlDistributionPoints = URI:http://server.test.av/test_ca.crl ... |
cd /etc/freeradius/3.0/certs rm -f *.pem *.der *.csr *.crt *.key *.p12 serial* index.txt* # This step is probably not needed, make ca.pem make ca.der make server.pem make server.csr chown freerad:freerad * chmod o-rwx * rm bootstrap rm passwords.mk # Delete all other files in the folder except: server.cnf, ca.cnf, xpextensions, Makefile, README, dh, ca.pem, server.pem, server.key |
Modify /etc/freeradius/3.0/mods-available/eap, modify the following directives under section 'tls-config tls-common' to be:
private_key_password = password # Replace password with the password chosen previously '@@@' same or different? private_key_file = /etc/freeradius/3.0/certs/server.pem .... certificate_file = /etc/freeradius/3.0/certs/server.pem .... ca_file = /etc/freeradius/3.0/certs/ca.pem |
apt-get install mysql-server freeradius-mysql mysql -uroot CREATE DATABASE radius; exit mysql -uroot radius < /etc/freeradius/3.0/mods-config/sql/main/mysql/schema.sql |
Edit /etc/freeradius/3.0/mods-config/sql/main/mysql/setup.sql. Modify the following lines:
CREATE USER 'radius'@'localhost'; SET PASSWORD FOR 'radius'@'localhost' = PASSWORD('radpass'); |
to
CREATE USER 'freerad'@'localhost' IDENTIFIED VIA unix_socket; |
and update the username 'radius' to be 'freerad' wherever else it is mentioned in the file.
mysql -uroot radius < /etc/freeradius/3.0/mods-config/sql/main/mysql/setup.sql |
cd /etc/freeradius/3.0/mods-enabled ln -s ../mods-available/sql sql |
In /etc/freeradius/3.0/mods-enabled/sql, set the following options:
driver = "rlm_sql_mysql" dialect = "mysql" server = "localhost" port = 3306 login = "freerad" password = "" radius_db = "radius" logfile = ${logdir}/sqllog.sql |
Modify /etc/freeradius/3.0/sites-enabled/inner-tunnel, find the following line under authorize, post-auth and Post-Auth-Type REJECT sections
-sql |
modify it to
sql |
Modify /etc/freeradius/3.0/sites-enabled/default, find the following line under authorize, post-auth and Post-Auth-Type REJECT sections
-sql |
In the post-auth and Post-Auth-Type REJECT sections, modify it to
sql |
In the authorize section, comment it out.
apt-get install libpython2.7-dev # It is not fully sure whether this package is needed cd /etc/freeradius/3.0/mods-enabled ln -s ../mods-available/python python |
Put the following in it:
# # Make sure the PYTHONPATH environmental variable contains the # directory(s) for the modules listed below. # # Uncomment any func_* which are included in your module. If # rlm_python is called for a section which does not have # a function defined, it will return NOOP. # python { module = script_launcher python_path = ${modconfdir}/${.:name}:/usr/lib/python2.7 mod_post_auth = ${.module} func_post_auth = post_auth } |
Modify /etc/freeradius/3.0/sites-enabled/inner-tunnel:
... # Add this line just after 'sql' in the 'post-auth' section python ... |
Modify /etc/freeradius/3.0/mods-available/eap, modify the 'copy_request_to_tunnel' directive under both sections 'peap' and 'ttls' to be:
copy_request_to_tunnel = yes |
Place the script_launcher.py script from the shwl_add_shwl_del_sl_pmu archive at /etc/freeradius/3.0/mods-config/python/script_launcher.py
chown freerad:freerad /etc/freeradius/3.0/mods-config/python/script_launcher.py chmod 640 /etc/freeradius/3.0/mods-config/python/script_launcher.py |
apt-get install sudo |
Create /etc/sudoers.d/shwl_add_shwl_del_pmu, permissions 640 root:root, with:
freerad ALL=(root:root) NOPASSWD:/sbin/shorewall,/usr/bin/arp-scan |
Prerequisites from above steps: sudo, FreeRADIUS python module / script_launcher.py script, shorewall, FreeRADIUS MySQL
apt-get install arp-scan # Install the shwl_*.sh scripts from the shwl_add_shwl_del_sl_pmu archive in /usr/local/sbin/ chown root:freerad /usr/local/sbin/shwl_* chmod 750 /usr/local/sbin/shwl_* mkdir /var/local/shwl_add chown freerad:freerad /var/local/shwl_add chmod 700 /var/local/shwl_add chmod a-s /var/local/shwl_add |
Add the following line to freerad's crontab
*/1 * * * * /usr/local/sbin/shwl_del.sh |
Settings in /usr/local/sbin/shwl_add.sh (at top of file):
.... # Settings cfg_shwl_zone="wifi1" # Shorewall dynamic zone to which client devices' IP addresses need to be added cfg_shwl_retry_delay=2 # Number of seconds to wait, in case of failure in adding IP to shorewall dynamic zone, before attempting second time cfg_file_location="/var/local/shwl_add" # Folder where runtime information will be stored cfg_file_location_owner_user="freerad" # User by which above folder should be owned cfg_file_location_owner_group="freerad" # Group by which above folder should be owned cfg_ip_srch_iface="enp0s8" # Network interface on which to scan for devices cfg_ip_srch_initial_delay=1 # How many seconds to wait before first attempt at scanning cfg_ip_srch_retry_delay=2 # How many seconds to wait in between further attempts at scanning cfg_ip_srch_max_attempts=15 # Maximum number of attempts at scanning before giving up cfg_mysql_user="freerad" # MySQL username cfg_mysql_db="shwl_add_shwl_del_pmu" # MySQL database name where to log events cfg_mysql_log_table="event_log" # Table in MySQL database where to log events .... |
Settings in /usr/local/sbin/shwl_del.sh (at top of file):
.... # Settings cfg_ip_match_pattern="192.168." # Pattern to match all IP addresses that might be in the shorewall dynamic zone cfg_session_expiry_timeout=3660 # Session duration (should be slightly longer than Session-Timeout attribute specified in FreeRADIUS) cfg_shwl_zone="wifi1" # Shorewall dynamic zone containing clients' IP addresses cfg_file_location="/var/local/shwl_add" # Folder where runtime information is stored cfg_file_location_owner_user="freerad" # User by which above folder should be owned cfg_file_location_owner_group="freerad" # Group by which above folder should be owned cfg_mysql_user="freerad" # MySQL username cfg_mysql_db="shwl_add_shwl_del_pmu" # MySQL database name where to log events cfg_mysql_log_table="event_log" # Table in MySQL database where to log events .... |
mysql -uroot CREATE DATABASE shwl_add_shwl_del_pmu; GRANT ALL on shwl_add_shwl_del_pmu.event_log TO 'freerad'@'localhost'; exit mysql -uroot shwl_add_shwl_del_pmu < shwl_add_shwl_del_pmu.sql # Updating shwl_add_shwl_del_pmu.sql to the full path of the shwl_add_shwl_del_pmu.sql file extracted from the shwl_add_shwl_del_sl_pmu archive |
Prerequisities from above: sudo, FreeRADIUS MySQL, shwl_add / shwl_del scripts MySQL
apt-get install libpam-script sshpass mkdir /usr/share/libpam-script/pam-script.d/pam_to_mysql_update cd /usr/share/libpam-script/pam-script.d/pam_to_mysql_update # Install the pam_to_mysql_update.sh script from the shwl_add_shwl_del_sl_pmu archive in here ln -s pam_to_mysql_update.sh pam_script_auth ln -s pam_to_mysql_update.sh pam_script_passwd mysql -uroot GRANT ALL on radius.radcheck TO 'freerad'@'localhost'; exit pam-auth-update # And, uncheck the box for "Support for authentication by external scripts" |
Add the following line at the end of /etc/pam.d/common-auth:
.... auth required pam_script.so onerr=fail dir=/usr/share/libpam-script/pam-script.d/pam_to_mysql_update/ |
Add the following line at the end of /etc/pam.d/common-password:
.... password required pam_script.so onerr=fail dir=/usr/share/libpam-script/pam-script.d/pam_to_mysql_update/ |
Settings in /usr/share/libpam-script/pam-script.d/pam_to_mysql_update/pam_to_mysql_update.sh (at top of file):
.... # Settings cfg_mysql_user="freerad" # MySQL username cfg_mysql_user_db="radius" # MySQL database name where to update passwords cfg_mysql_log_db="shwl_add_shwl_del_pmu" # MySQL database name where to log events cfg_mysql_user_table="radcheck" # Table in MySQL database where to update passwords cfg_mysql_log_table="event_log" # Table in MySQL database where to log events cfg_verbose=0 # Print verbose messages on stdout .... |
The below procedures also create/change password for/delete system users as well as users for FreeRADIUS.
Replace 'user' with the desired username.
mysql -uroot use radius; INSERT INTO radcheck VALUES ('','user','NT-Password',':=',''); exit adduser user # When prompted for "Current password:", ignore and press enter |
It is sufficient to use standard utilities such as 'passwd', the password will be updated in the MySQL database as well. Tested with 'passwd' and User Accounts applet in GNOME. In case prompted with "Current password:" (exactly as written here) it is sufficient to ignore and press enter. Commands that expire or disable a user's system user account (or password) without deleting it (such as passwd -l) will not cause the credentials in the MySQL database to be disabled, thus it is necessary to take care (perhaps with a site specific lock user script) to also invalidate the same.
Replace 'user' with the username to be deleted.
mysql -uroot use radius; DELETE FROM radcheck WHERE username='user'; exit deluser user |
These are the settings that usually need to be configured, on dual-band routers it might be necessary to configure some of the settings twice, once under the settings for the 2.4GHz SSID and once for the 5GHz SSID:
In this model, the "Reauthentication period" setting is not available, but the router does honor the timeout specified by the RADIUS server. Operation mode can be set to "Access Point". All other settings should be set as mentioned above. This is a dual band router and some settings need to be set in two places, once for each SSID.
In this model, the "Reauthentication period" setting is available as "Network Re-auth Interval", and the router also does honor the timeout specified by the RADIUS server, and follows whichever is smaller. Setting the setting to zero causes the feature to be disabled and the timeout specified by the RADIUS server to also be ignored. Operation mode can be set to "Wireless Router Mode". All other settings should be set as mentioned above.
In this model, the "Reauthentication period" setting is not available, and the router does not honor the timeout specified by the RADIUS server. The hostapd daemon running on this router supports the feature and works in a similar way as in the above TP-Link TD-W8968 V4, but no option to configure it is available in the web interface, and hostapd is run with this setting set to 0. Judging by the source code of this (very old) version of hostapd, it is believed (but not tested) that this means, once authenticated, the router might allow the supplicant to continue being part of the network for up to twelve hours without querying the RADIUS server again. A fix is possible to make hostapd run with its default setting of 3600 seconds, but is out of the scope of this wiki page. No operation mode setting is available. All other settings should be set as mentioned above.
On Linux and Android supplicants it is required to install the .ca file generated during certificate generation in order to verify the RADIUS server's identity. In case the identity presented by the RADIUS server changes at any point, the supplicant fails to connect, and re-presents the user with the prompt for network credentials. It is possible to connect without installing the .ca file, but one needs to specify "No CA certificate required" or "Do not validate". In this case the supplicant will send credentials to any RADIUS server for that SSID without verifying its identity. It is possible to avoid sending the real user name in the unencrypted outer tunnel, by specifying a different value (normally 'anonymous') in the "Anonymous identity" field.
On Mac OS and iPhone supplicants, when connecting to the SSID for the first time, the server certificate's details are presented to the user and the user is asked if they want to trust the server. In case the identity presented by the RADIUS server changes at any point, the user will be prompted with a message, not containing any warning, sadly, that looks identical to the one displayed when connecting for the first time, where a user is extremely likely to press Trust once again. On Mac OS, it is also possible to copy the .ca file and install it, avoiding the prompt on first connect, on iPhone, on the iPhone this was tested on, this did not have any effect. It seems to be possible, but greatly complicated (involving installing a software from the App Store, and using it to create a configuration profile which then needs to be saved to a file, copied and imported onto the supplicant device) to configure the supplicant to not send the real user name in the unencrypted outer tunnel.
Windows 10 '@@@'
https://wiki.freeradius.org/guide/Basic-configuration-HOWTO
https://wiki.freeradius.org/guide/SQL-HOWTO-for-freeradius-3.x-on-Debian-Ubuntu
https://wiki.freeradius.org/modules/Rlm_python
https://wiki.freeradius.org/config/Certificates
http://deployingradius.com/documents/configuration/certificates.html
http://deployingradius.com/documents/protocols/compatibility.html