Child pages
  • 802.1X secured wifi installation
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 19 Next »


Components involved


Replication of production setup

Here, we replicate the relevant parts of the present installation as a starting point.

Base virtual machine preparation

Imported ~/Documents/Debian9-base.ova into Virtual Box as Debian9-base_8021x, re-initializing all MAC addresses. The description for this virtual machine template is:

Debian 9 amd64 installation
- Hostname:
- User accounts (username password):
ls last
root last
- Partitioning:
--- Physical:
------ 1GB RAID boot flag
------ 29GB RAID
--- RAID:
------ md0: ext3 /boot
------ md1: LVM - part of volume group debian9-base
--- LVM (VG/LV):
------ debian9-base/root: 18.6GB ext4 /
------ debian9-base/swap: 3.72GB swap area
- Up to date as of 2017-09-27
- sources.list includes:
Sections: main contrib non-free
Additional repository: backports
- Apt-cacher configured as per Last School site (Proxy credentials will need to be entered in /etc/apt/apt.conf.d/02proxy by user)
- SSH access installed and enabled

- Gnome and Firefox configured to auto-detect proxy settings
- Extra software installed:
vlc gimp emacs fonts-indic tcpdump iperf exfat-utils wireshark

- One network interface as bridged adapter, cable connected.

Added a second ethernet adapter in settings, connected to "Not attached", re-initialized its MAC address
Increased the allocated CPUs to 2

The network configuration is now as follows:

enp0s3 - Adapter 1 - Bridged adapter

enp0s8 - Adapter 2 - Not attached

Booted, disconnected eth2 because of errors

Logged in to GUI, connected DHCP

rm /etc/apt/apt.conf.d/02proxy
apt-get update
apt-get upgrade

Rebooted the virtual machine

Set strong passwords for ls and root users

Installed my ssh public key in root's .ssh/authorized_keys file.


Installation of relevant services:

Shorewall (based on LASTSCHL-207):


apt-get install shorewall
apt-get install ipset
mv /etc/shorewall{,-orig}
mkdir /etc/shorewall
root@debian9-base:/etc/shorewall# for i in `ls`; do echo "========= $i ========="; cat $i | grep -v "^#" | grep -v "^$"; echo "========= $i ========="; echo ""; done
========= hosts =========
========= hosts =========

========= interfaces =========
net     enp0s3         detect      tcpflags,dhcp,nosmurfs,routefilter,logmartians
wifi	enp0s8		   detect	   tcpflags,nosmurfs,routefilter,logmartians
========= interfaces =========

========= masq =========
========= masq =========

========= policy =========
$FW		net		REJECT		INFO(uid)
$FW		wifi	ACCEPT		INFO(uid)
wifi	all		REJECT
net		all		DROP		INFO
all		all		REJECT		info
========= policy =========

========= routestopped =========
========= routestopped =========

========= rules =========
Invalid(DROP)		 net			 all
ACCEPT:INFO(uid)     net             $FW             tcp     22
ACCEPT:INFO(uid)     net             $FW             udp     123
ACCEPT:INFO(uid)     net	     	 $FW	     	 icmp
ACCEPT:INFO(uid)     $FW             net             tcp     465,587,995,993
ACCEPT:INFO(uid)     $FW             net             udp     53,123
ACCEPT:INFO(uid)     $FW	     	 net	     	 icmp
ACCEPT:INFO(uid)     $FW             net             tcp     -            -               -               -               root
ACCEPT:INFO(uid)     $FW             net             udp     -            -               -               -               root
ACCEPT:INFO(uid)     $FW             net             icmp    -            -               -               -               root
ACCEPT:INFO(uid)     $FW             net             tcp     -            -               -               -               _apt
ACCEPT:INFO(uid)     $FW             net             udp     -            -               -               -               _apt
ACCEPT:INFO(uid)     $FW             net             icmp    -            -               -               -               _apt
========= rules =========

========= shorewall.conf =========
========= shorewall.conf =========

========= zones =========
fw			firewall
net			ipv4
wifi		ipv4
========= zones =========

In /etc/default/shorewall, set

root@server.lastschl:~# scp /etc/rsyslog.d/40-shorewall.conf
root@server.lastschl:~# scp /etc/logrotate.d/shorewall
root@server.lastschl:~# scp /etc/logrotate.d/rsyslog
root@server.lastschl:~# scp /etc/logrotate.conf

systemctl enable shorewall.service

Configure network and DHCP (based on LASTSCHL-212):

systemctl disable network-manager.service
systemctl disable NetworkManager.service


# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The external interface
auto enp0s3
iface enp0s3 inet static
# The wifi interface
auto enp0s8
iface enp0s8 inet static
unlink /etc/resolv.conf
echo nameserver > /etc/resolv.conf
mkdir /etc/ltsp
root@server.lastschl:~# scp /etc/dhcp/dhcpd.conf



# Default LTSP dhcpd.conf config file.


subnet netmask {
    option domain-name "test.av";
    option domain-name-servers;
    option broadcast-address;
    option routers;
    option subnet-mask;
    option root-path "/opt/ltsp/amd64";
    if substring( option vendor-class-identifier, 0, 9 ) = "PXEClient" {
        filename "/ltsp/amd64/pxelinux.0";
    } else {
        filename "/ltsp/amd64/nbi.img";




In /etc/default/isc-dhcp-server, set:

apt-get install isc-dhcp-server




Configure DNS (based on LASTSCHL-211):

apt-get install dnsmasq
touch /var/log/dnsmasq
chmod 640 /var/log/dnsmasqSet in /etc/dnsmasq.conf

	rotate 730
		reload rsyslog >/dev/null 2>&1 || true



/etc/hosts	localhost	test.av	server.test.av	server

# The following lines are desirable for IPv6 capable hosts
::1     localhost ip6-localhost ip6-loopback
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters


New stuff


Added to /etc/shorewall/hosts:

wifi1 enp0s8:dynamic

added to policy:
wifi1 net ACCEPT INFO
wifi1 $FW ACCEPT INFO(uid)
$FW wifi1 ACCEPT INFO(uid)
Added to /etc/shorewall/zones:

wifi1:wifi ipv4 dynamic_shared

In shorewall.conf set:



packages: freeradius

Modified /etc/freeradius/3.0/mods-available/eap:

commented the following:

#       md5 {
#       }
#       leap {
#       }
#       gtc {
#               #  The default challenge, which many clients
#               #  ignore..
#               #challenge = "Password: "
#               #  The plain-text response which comes back
#               #  is put into a User-Password attribute,
#               #  and passed to another module for
#       	#  authentication.  This allows the EAP-GTC
#               #  response to be checked against plain-text,
#               #  or crypt'd passwords.
#               #
#               #  If you say "Local" instead of "PAP", then
#       	#  the module will look for a User-Password
#               #  configured for the request, and do the
#               #  authentication itself.
#               #
#               auth_type = PAP
#       }
#       tls {
#               # Point to the common TLS configuration
#               tls = tls-common
#       	#
#               # As part of checking a client certificate, the EAP-TLS
#               # sets some attributes such as TLS-Client-Cert-CN. This
#               # virtual server has access to these attributes, and can
#               # be used to accept or reject the request.
#       	#
#       #       virtual_server = check-eap-tls
#       }

modified the 'default_eap_type' directive under section 'eap' to be:

default_eap_type = peap

and the 'default_eap_type' directive under section 'ttls' to be:

default_eap_type = mschapv2

Modify /etc/freeradius/3.0/clients.conf, comment the 'client localhost' and 'client localhost_ipv6' section and add a few of these blocks at the end, one for each wifi router:

client test1 { # Replace test1 with a name for the router
       ipaddr = # Replace with IP of the router
       secret = password # Replace with an actual password



as freerad?

Modified "@@@"

as freerad ("@@@" right way to do it?):

cd /etc/freeradius/3.0/certs

Modify /etc/freeradius/3.0/mods-available/eap, modify the following directives under section 'tls-config tls-common' to be:

private_key_password = password # Replace password with the password chosen previously
private_key_file = /etc/freeradius/3.0/certs/server.pem
certificate_file = /etc/freeradius/3.0/certs/server.pem
ca_file = /etc/freeradius/3.0/certs/ca.pem



Python module / script

cd /etc/freeradius/3.0/
ln -s mods-available/python mods-enabled/

Put the following in it:

# Make sure the PYTHONPATH environmental variable contains the
# directory(s) for the modules listed below.
# Uncomment any func_* which are included in your module. If
# rlm_python is called for a section which does not have
# a function defined, it will return NOOP.
python {
	module = script_launcher # @#$dy

	python_path = ${modconfdir}/${.:name}:/usr/lib/python2.7 # @#$dy
	mod_post_auth = ${.module} # @#$dy
	func_post_auth = post_auth # @#$dy

Modify /etc/freeradius/3.0/sites-enabled/inner-tunnel:

# Add this line just after 'sql' in the 'post-auth' section

Modify /etc/freeradius/3.0/mods-available/eap, modified the 'copy_request_to_tunnel' directive under both sections 'peap' and 'ttls' to be:


copy_request_to_tunnel = yes


Place the script at /etc/freeradius/3.0/mods-config/python/



packages: sudo

shwl_add / shwl_del scripts

 packages: arp-scan

apt-get install arp-scan
# Install the scripts in /usr/local/sbin/, and configure settings in each of them
chown root:freerad /usr/local/sbin/shwl_*
chmod 750 /usr/local/sbin/shwl_*
mkdir /var/local/shwl_add
chown freerad:freerad /var/local/shwl_add
chmod 700 /var/local/shwl_add
chmod a-s /var/local/shwl_add

Add the following line to freerad's crontab

*/1 * * * * /usr/local/sbin/ # @#$dy # @@@ figure out optimal interval

MySQL script

Pre-requisites from above steps: sudo, shwl_add / shwl_del scripts MySQL config, FreeRADIUS MySQL config

apt-get install libpam-script sshpass
mkdir /usr/share/libpam-script/pam-script.d/pam_to_mysql_update
cd /usr/share/libpam-script/pam-script.d/pam_to_mysql_update
# Put the script in here, and configure MySQL settings inside
ln -s pam_script_auth
ln -s pam_script_passwd

Add the following line at the end of /etc/pam.d/common-auth or as may be appropriate to the PAM configuration of the system:

auth	required               onerr=fail dir=/usr/share/libpam-script/pam-script.d/pam_to_mysql_update/

Add the following line at the end of /etc/pam.d/common-password or as may be appropriate to the PAM configuration of the system:


password	required               onerr=fail dir=/usr/share/libpam-script/pam-script.d/pam_to_mysql_update/

  • No labels